- Record your RS232 data to non-volatile, replaceable media store at your convenience.
- 256MB, 512MB, 1GB, 2GB & 4GB storage capacity options.
- Fully unattended operation possible including automatic power shutdown.
- Well over 60 hours of recording time possible from a single PP3 Alkaline battery.
- All user options configurable via an easy to use terminal menu system.
- All user options selected are non-volatile even if all sources of power are removed.
- Independently programmable receiver and playback baud rates from 110 up to 460,800.
- Full rate 460,800 baud data capture with no hold off.
- Ideal for recording important trials data in the field, e.g. from GPS.
- 'Real time' NMEA playback mode to simulate a GPS receiver output.
- Can log independent 'user events' during data logging using the 'On' and 'Off' buttons.
-
Fully automatic 'log whenever powered' option available ('P' option)
- User equipment commands can be issued during record simply by pressing 'On' button.
- Switchable RTS/CTS handshaking for playback.
- Does not require dedicated host based software to extract recorded data.
- Supports X-Modem playback (1024/128 byte blocks, 16-bit CRC compatible).
- Can be powered from an external DC power source in the range 4.5 to 18V.
- Internal and external supplies are reverse polarity protected.
- Dynamic power management saves power when using slower baud rates.
- Battery health check via menu system with terminal load voltage report.
- Small boxed profile 90mm x 60mm x 25mm.
- OEM card size 60mm x 50mm x 17mm.
- Robust, surface mount construction.
- Up to one week of operation with a lithium battery.
-
*NEW* Security option now available to prevent unauthorised access

